Bright Water Pool Company logo

Pool Equipment Repair in Franklin, Brentwood, Belle Meade & Nashville

Heater Repair, Pump Repair, Salt Cell Replacement & Automation

We evaluate the full system, test your water chemistry, and install replacements with manufacturer warranty registration so the repair is done right and protected.

or call/text (615) 437-4343
Full-system evaluation
Water tested on site
Certified warranty center
Written estimate first

Request a Repair Estimate

Tell us what the equipment is doing. Our team will reply to schedule an on-site evaluation.

Pentair automation panel opened for service by a Bright Water technician
Hayward OmniLogic control system installed on an equipment pad wall
Pool equipment repair

The part that failed is only part of the story

Pool equipment works as one system, and the water runs through all of it. When a heater, pump or salt cell fails, we look at what caused it before we recommend the fix: the equipment around it, the way the system is set up and the chemistry of the water itself.

That is why every repair starts with an on-site evaluation and a water chemistry test, and why new equipment is installed to manufacturer standards and registered before we leave.

  • Heater repair and replacement
  • Salt cell repair and replacement
  • Pump repair and replacement
  • Pool light repair and LED upgrades
  • Automation programming
  • The full range of equipment repairs
Request a Repair Estimate
What we repair and replace

Heaters, salt cells, pumps, lights and automation

Heater Repair & Replacement

Pool heater repair and replacement across Franklin, Brentwood, Belle Meade, 12 South, and the surrounding Davidson and Williamson County area. Heaters fail early more often from water chemistry and corrosion than from age alone. We diagnose the problem, test your water on site, and check for a zinc anode. A sacrificial zinc anode helps protect the heat exchanger, salt cell, and other metal components by corroding first, especially valuable on salt systems.

As a Hayward, Pentair, and Jandy certified warranty center, we install replacements to manufacturer standards and register them before we leave so the equipment carries the full manufacturer warranty.

Salt Cells

Salt cell repair and replacement. Salt cells commonly lose performance from scale, high pH, or unbalanced chemistry. We test the water, inspect the cell, and address the conditions that affect its life before installing a replacement. New cells are registered with the manufacturer the same day.

Pumps

Pool pump repair and replacement. A pump should match the pool and the plumbing it serves. We evaluate the existing setup and recommend the option that will circulate water efficiently and reliably, whether a direct replacement or a different model better suited to the system. The result is quieter operation, less strain on the rest of the equipment, and dependable performance.

Lights, Automation & Other Repairs

Pool light repair, LED light replacements, automation programming and troubleshooting, and the full range of equipment repairs, all with the same system-level evaluation and clear communication.

Looking for leak detection, plumbing or filter repairs? See pool repair services.

Certified warranty center

Replacements are installed to manufacturer standards and registered before we leave, so your new equipment carries the full manufacturer warranty.

HaywardPentairJandy
Our process

What You Can Expect

1

Evaluation and water test

On-site evaluation and water chemistry test so you know exactly where the pool stands.

2

Written estimate

Clear written estimate with options.

3

Your approval

Your approval before any work begins.

4

Repair and registration

Professional repair or replacement, verification, photos, and manufacturer registration on new equipment.

Chemistry and equipment

Why every repair starts with a water test

Heaters fail early more often from water chemistry and corrosion than from age alone, and salt cells commonly lose performance from scale, high pH or unbalanced chemistry. If the water that wore out the old equipment is not corrected, it will do the same to the new equipment.

So we test your water on site and evaluate it using the Langelier Saturation Index, or LSI, which weighs water temperature, pH, alkalinity and calcium hardness together. You see where the pool stands, and the repair comes with the conditions that protect it.

Langelier Saturation Index

One index, the whole picture

Aggressive waterPulls calcium out of plaster and grout and attacks metal in heaters and equipment.
Balanced waterProtects surfaces and equipment and stays clear and comfortable.
Scale-forming waterLeaves scale on tile lines, salt cells, heater exchangers and plumbing.

What we weigh for every pool

  • Water temperature
  • pH
  • Total alkalinity
  • Calcium hardness
  • Heater, salt cell and equipment
  • Trees, sun and rainfall
Google reviews

What homeowners say about our repair work

“Brightwater Pools was recommended to me after another company failed to complete a new pool heater installation and left my pool equipment in terrible shape. They also damaged my control system, which had to be replaced.

Collin and the team at Brightwater stepped in, diagnosed the problems, and got everything working again. They installed a new, simpler control system that is much easier to use, and they took the time to correct the mistakes left behind by the previous company.”

RR.L.H.Green Hills · Google review

“So glad I found Bright Water Pool Co. They replaced my pump last year and did a great job. Just opened my pool and they actually took the time to scrub the walls and are back today to check on everything. It’s so refreshing to have a company that shows pride in their work and gets it right the first time.”

CChristopherBrentwood · Google review
Why Bright Water

The standards behind every repair

A team that takes responsibility for the entire pool system, with the documentation to show it.

  • Clear written estimates and homeowner approval before repairsNo repair work begins until you approve it.
  • Experienced repair techniciansThe whole system is diagnosed, not just the part that failed.
  • Full pool and equipment-system evaluationsChemistry, circulation, filtration and equipment, assessed together.
  • Pentair, Hayward and other major equipment systemsHands-on experience with the equipment on your pad.
  • CPO-certified, professionally trained techniciansCertified Pool Operators with continuing education.
  • BBB AccreditedAccredited by the Better Business Bureau.
  • Licensed and insuredLicensed where required, with full liability coverage.
  • Routine quality-control checksManagers review service quality on a regular schedule.
  • Detailed service reports and photosAfter every visit: work performed, photos and observations.
  • LSI-based water chemistry managementBalanced for the conditions of each specific pool.

Pool equipment repair across Davidson and Williamson County

Serving Franklin, Brentwood, Belle Meade, 12 South, and surrounding areas in Davidson and Williamson County.

Related: Pool Repair · Pool Maintenance · Pool Opening · Pool Closing · Liner Replacement

Pool equipment repair FAQs

Quick answers about heaters, salt cells, pumps, warranties and estimates.

Heaters fail early more often from water chemistry and corrosion than from age alone. We diagnose the problem, test your water on site and check for a zinc anode, so the cause is addressed along with the heater.
A sacrificial zinc anode helps protect the heat exchanger, salt cell and other metal components by corroding first. It is especially valuable on salt systems. We check for one during a heater evaluation and tell you whether your system would benefit from one.
Yes. As a Hayward, Pentair and Jandy certified warranty center, we install replacements to manufacturer standards and register them before we leave, so the equipment carries the full manufacturer warranty.
Salt cells commonly lose performance from scale, high pH or unbalanced chemistry. We test the water, inspect the cell and address the conditions that affect its life before installing a replacement. New cells are registered with the manufacturer the same day.
It depends on the pump and the plumbing it serves. We evaluate the existing setup and recommend the option that will circulate water efficiently and reliably, whether that is a repair, a direct replacement or a different model better suited to the system. You receive a clear written estimate with options.
Yes. We handle pool light repair, LED light replacements, automation programming and troubleshooting, and the full range of equipment repairs, all with the same system-level evaluation and clear communication.
We start with an on-site evaluation and a water chemistry test so you know exactly where the pool stands. You then receive a clear written estimate with options, and no work begins until you approve it. The finished repair or replacement is verified and documented with photos, and new equipment is registered with the manufacturer.
We serve Franklin, Brentwood, Belle Meade, 12 South and surrounding areas in Davidson and Williamson County. Call or text (615) 437-4343 and our team will confirm your address.

Request a Repair Estimate

You get a clear diagnosis, professional work, and the peace of mind that the equipment is properly protected and fully warrantied. Serving Franklin, Brentwood, Belle Meade, 12 South, and surrounding areas in Davidson and Williamson County.

Free Pool Care Checklist

Subscribe for seasonal tips to take care of your pool and spa. Plus get our FREE Pool Care Cheat Sheet to keep your pool clean and balanced all year long.
Bright Water Pool Company logo
The clear choice for homeowners who demand quality and professionalism.

Contact Info

Phone: (615) 437-4343

Serving: Nashville

Address: 99 East Main Street,
Suite 200,Franklin TN 37064